 |
|
|
ZBH-polyacrylamide
flocculants made by our company can be classified into anionic
type, cationic type and nonionic type. Custom design available.
Usage:
1.Treatment
of drinking water and industrial water;
2.Treatment
of waste water, off-machine water recycle,
filling reservation, and filtering
water
improvement in the papermaking industry;
3.Treatment
of waste water of living; mud dehydrating;
4.Tertiary
recovery of oil well;
5.Treatment
of industrial effluents in mining, iron & steel, electroplating,
coal washing,
petroleum, printing and dyeing, tanning and food industry;
6.Solid-liquid
separation, e.g. sucrose concentrating, brine refining, ore
cleaning,etc.
Operation Guide
I)
Consumption:
a.
0.1～0.3ppm,
used as additives of flocculants;
b.
0.5～5ppm,
used as flocculants;
c.
0.03～0.3ppm,
used as filtering additives;
d.
0.1～2%ppm,
used as sludge conditioner.
II) Dilution and Feeding:
Pour
into half water of total volume, and then start mixer to agitate
the water;
whilewater
is
vortical, feed properly calculated flocculants and top up
the dilution well; and
then slowly agitate
the water till the flocculants dissolve absolutely.
III)Saturation
Limits:
0.25%
solution
(anionic
type and nonionic type)
0.5%
solution
(cationic type)
0.1%
solution
suitable
for general
dilute
solution .
Note:
Do
not mix it with other products, otherwise bad effects might
happen.
Specifications
|
Name
|
Electrical Property
|
Appearance
|
PH（0.1%
solution)
|
Solution Time
|
|
ZBH—101G
|
Weak negative electricity
|
Slight yellow
|
6～8
|
1.5h
|
|
ZBH—102G
|
Middle negative electricity
|
Slight yellow
|
6～8
|
1.5h
|
|
ZBH—103G
|
mezzo forte negative
electricity
|
Slight yellow
|
6～8
|
1.5h
|
|
ZBH—200G
|
Non-ionic
|
White
|
6～8
|
2h
|
|
ZBH—301G
|
Weak positive electricity
|
White
|
3～6
|
2h
|
|
ZBH—302G
|
Middle positive electricity
|
White
|
3～6
|
2h
|
|
ZBH—303G
|
Strong positive electricity
|
White
|
3～6
|
2h
|
Note:
The molecular weight of macromolecule flocculant is 3000,000-15,000,000. |
|
|
|
Product No.:
ZBH—201
Chemical
Name:
quaternary ammonium cationic high molecular polymer;
Technical Parameters:
(a)Appearance：colorless
thick liquid;
(b)Solid Content ：≥30
(c)Adhesive Viscosity
：100—3000cps/25℃
(d)PH
Value ：3—8/1%
liquid
solution;
Application:
1)Mainly
used to decolor high-color waster water produced by printing
and dyeing plant,
suitable
for
active, acidic and dispersed-dyestuff waste water;
2)Used for the treatment of industrial
effluents, produced by the textile, dye,
printing ink,
papermaking and petroleum industry;
3)Decoloring rate ﹥95%，the
removal rate of COD:
50%—70%;
Application
Guide and Note:
1.Dilute
it with 10-40
times
of water,
and
then feed the diluted products into waster water,
then
agitate the waste water for several minutes;
2.The PH value of waste water had better
be adjusted to 4—12;
3.If the chromaticity and COD of waste
water are relatively high, you can use it in combination with
PAC, but the mixed use is forbidden. The feeding order between
the product and PAC should be
flexibly adjusted according to agitation test and processing
technology;
4.The product is non-inflammable and
non-explosive and can be stored under room temperature.Do
not insolate it.
Package, Storage
and Transportation
1.Plastic
barrel, net weight 25kg and 200kg per barrel;
2.Storage duration:
half a year under room temperature;
3.Transport
goods be behalf of customers; |
|
|
|
|
