Chemical Name: Dichlorine isocyan sodium urate
Features and Specifications:
1.White powder, water-soluble; it is an effective, low-toxitic, broad-spectrum and frequent disinfector.
　With the disinfecting rate up to 90% at 200mg/L, the product can be used for the disinfection of
　cooling water circuits and swimming pool water system;
2.Thanks to its stable property, the reduction of active chlorine can not exceed 1% after half a year, if it
　is stored in a dry place. It will not degenerate and flame, stored under the temperature environment
　at 120℃ or below.
Technical Parameters
　 　(a)Active Chlorine Content ：≥56.0%;
　　　(b)PH Value(0.1% solution)：6.0—7.5
　　　(c)Appearance：white solid
Application Guide: 15-20mg/l consumption one time every 2 to 3 days in summer; the same consumption one time every 3 to 5 days in spring and autumn; and the same consumption one time every 5 to 7 days in winter; Additionally, periodic feeding of non-oxidic disinfectors applicable.
Package and Storage: sealed plastic bag, paperboard can, net weight 50kg per can; storage duration: one year in a cool place.

Chemical Name: TCCA
Features and Specifications: white powdery or granular solid, water-soluble, outstanding performance for killing aerobic bacteria and anaerobic bacteria, high active chlorine content, cost-effective;
Usage: disinfection of drinking water, swimming pool water, industrial circulating water, and sewage,etc. Also, it can be used for disinfection in house, hospital, hotel,etc. 10-15mg/l consumption one time every 2 to 3 days in summer; the same consumption one time every 3 to 5 days in spring and autumn; and the same consumption one time every 5 to 7 days in winter;
Technical Parameters:
　　 　(a)Valid chlorine content：≥85%;
　　　　(b)Moisture：≤1.0%
　　　　(c)PH Value（0.1% solution ）：2.7—3.3
Package and Storage: plastic bag, fiberboard can or plastic barrel, net weight 40kg per barrel, custom design available; storage duration: one year in a cool and dry place;
Note: prevention of rain wet and insolation; Do not mix it with acid, alkali and other oxidizable organic matters; Operators should wear protecting mask and plastic gloves while feeding the product.

It is a newly-developed algaecide and features:
1.High active matter content, low consumption, high bactericidal efficiency, and low handling cost;
2.long storage duration;
3.Convenient feeding and easy operation;
Features and Specifications:
1. Broad-spectrum bactericide oxide, high bactericidal efficiency;
2. Fast bactericidal speed;
3. Stronger bactericidal efficiency than chlorine, while the PH value exceeds 8.0;
4. No reduction of bactericidal efficiency in the water that contains ammonia and nitrogen, e.g. water
　 treatment system in synthetic ammonia plant;
5. Excellent compatibility with water stabilizer;
Application: It can be widely used for the treatment of circulating cooling water, tap water, infused water of oil field, and wastewater from paper mill, etc.
Technical Parameters:
　　　　　(a)Properties 　　　：white powder;
　　　　　(b)Active matter content 　　：≥40%
　　　　　(c)PH Value （0.1% solution）：6.0—8.0
Application Guide: primary consumption: 20—40 mg/L; and 5—25 mg/L consumption each time, one time every 1-7 days; remaining chlorine of （0.1—1.0）mg/L added for 2-4 hours;
Package and Storage: plastic bag, cardboard can, net weight 25kg or 50kg per can; storage duration: 10 months in a cool and ventilated place.

HS-916 cleaner is characterized by high oil removal efficiency, low consumption and no spray foam and may be used for short-term rust prevention.
1 、Middle temperature cleaner

2、Normal-temperature cleaner

　　Note: Cleaner can be specially formulated to meet the requirements of customers. Phosphorous-free cleaner can be provided.

　　The above mentioned cleaners are widely used by China Iveco Motors Factory, Nanya Motors Factory, Yangzhou Power Corporation, Wuxi Xishan Diesel Engine Plant, Yangzhou Diesel Engine Works.For further information, please contact us at:

　　Person to Contact: Yang Wenhong

　　Tel:0519-88607739

　　Fax:0519-88606098

　　tell Phone:：13004405501